Osmo Polyx-Oil Original 3040, white transparent satin

About this product

Osmo Polyx-Oil Original (sold in Belgium as Hardwax-Olie Original) is the classic Osmo finish for wooden floors. It combines plant oils and waxes in one product: the oil penetrates the wood, the wax gives a hard-wearing surface that repels water and dirt. The finish stays microporous, so it will not crack, peel or flake.

The white transparent version 3040 gives the wood a light white veil without hiding the grain. Ideal for oak and other light woods whose pale colour you want to keep. Use 3040 White (or 3044 Raw) for the second coat as well, rather than a clear oil, to prevent yellowing.

Suitable for all indoor wooden floors: solid wood, planks, parquet, strip flooring, OSB and cork, as well as stairs and furniture. Once dry, the surface resists wine, beer, cola, coffee, tea, fruit juice, milk and water (DIN 68861-1A) without water marks.

For routine cleaning, mop with a damp (not wet) mop and water with Osmo Wisch-Fix (Wash and Care). Worn spots and stubborn marks can be refreshed with Osmo Liquid Wax Cleaner 3029. When the floor becomes dull over time, apply a thin coat of Osmo Maintenance Oil, no sanding needed.

How to use it

• The wood must be clean, dry and frost-free (moisture content max. 18%). Remove old paint or lacquer completely.
• Sand starting with a coarse grit; finish floors at P100-120 (coloured: at least P100, P120-150 for an even colour), furniture at P120-180. Vacuum the dust thoroughly.
• Stir well, do not thin. Apply thinly along the grain with an Osmo microfibre roller, floor brush or flat brush and spread well. Do not wipe off with a cloth.
• Leave to dry for approx. 24 hours with good ventilation, then apply a second thin coat.
• Use 3040 White (or 3044 Raw) again for the second coat to prevent yellowing.
• When renovating an oiled surface, one coat on the clean, dry floor is usually enough.

Technical details

Brand

Osmo

Size

2.5 l

Colour code

3040

Sheen

satin

Coverage

approx. 30 m² per litre per coat (depends on wood and surface)

Number of coats

2 coats on bare wood

Drying time

approx. 24 hours per coat (20-23 °C, 50-65% RH, good ventilation)

Base

plant oils and waxes, solvent: dearomatised white spirit

Tools

Osmo microfibre roller, floor brush or flat brush

Tool cleaning

Osmo Brush Cleaner (free of aromatics)

Item number

10300022

EAN

4006850813896