Osmo Exterior Oil Stain 700 pine

About this product

Osmo Exterior Oil Stain (formerly Natural Oil Woodstain) is a transparent wood protection based on natural plant oils for all exterior wood: cladding, fences, pergolas, sheds, carports, balconies, windows and doors, and decks too. Primer and top coat in one product.

Colour 700 Pine gives a light, warm wood tone that suits spruce and pine. Light transparent colours offer less UV protection; for surfaces in strong sunlight Osmo recommends a darker shade.

The finish stays microporous, so the wood can breathe and swells and shrinks less. It is water repellent, does not crack, flake or peel, and is easy to refresh later without sanding. The stain contains active ingredients that protect the coating against mould and algae, so use it outdoors only.

Check the wood regularly and apply one new coat on weathered areas after cleaning. If the wood has turned grey, first refresh it with Osmo Wood Reviver Power Gel.

How to use it

• The wood must be clean, dry and frost-free (max. 20 % moisture). Remove old paint and varnish completely first.
• Stir well, do not thin. If possible, apply the first coat to all sides before installation.
• Apply thinly and evenly with a brush, pad or microfibre roller along the grain and spread out well.
• Allow 4-6 hours to dry with good ventilation, then apply the second coat.
• Renovation: one coat on the clean surface is usually enough, no sanding needed.

Technical details

Brand

Osmo

Size

2.5 l

Use

Outdoor: cladding, fences, pergolas, sheds, windows, doors, decks

Base

Natural plant oils, with biocide protecting the coating against mould and algae

Finish

satin matt

Coverage

approx. 26 m² per litre per coat

Number of coats

2 coats on bare wood, 1 coat for renovation

Drying time

recoatable after 4-6 hours, dry after approx. 12 hours

Tools

Brush, microfibre roller or pad

Tool cleaning

Osmo Brush Cleaner (aromatic-free)

VOC content

max. 400 g/l

Item number

12100002

EAN

4006850834815